Polishing Guideline
Before Using Veneer
( Natural / DYED / hybrid - Engineered Veneer )
Lightly sand the veneer along the grain
with 220–320 grit sandpaper.
Apply a non-yellowing, clear wood base coat "pu water base
or pu acrylic 2k" - of a reputed standard company
to protect from moisture, stain, direct or indirect sunlight
or uv light, heat etc.
Nc polish, melamine polish,
shellac polish is not recommended.
Strictly avoid direct or indirect sunlight completely.
Before Top Coat
(Natural / Dyed / Hybrid - Engineered Veneer)
Lightly sand the veneer along the grain with 220-320 grit sandpaper.
Ensure there are no glue marks, dust or damage surface.
Work in a clean, dust-free, ventilated dry area.
Test polish on a small area or small sample before full application.
Apply thin coats using a spray gun or brush or cotton polishing cloth.
Allow minimum 3 to 6 hours drying time between coats.
Sand with 400-600 grit sandpaper between coats.
Recommended: 2-3 coats for a smooth, protective finish.
After the final coat dries (24-48 hours), lightly buff the surface using: fine-grade rubbing compound or non-abrasive wood polish.
Reasons For Discoloration in
hybrid - engineered veneer,
dyed veneer and natural
veneer
Direct - Indirect exposure to
uv light or sunlight
Cause:
Prolonged exposure to sunlight or uv light during or after
polishing
can break down certain dyes. sunlight - uv light or heat can prematurely oxidize the
surface during or right after polishing.
Effect:
This may alter the colour tone or fade the finish or change to
yellowing tone.
Advice:
Apply a base coat of non-yellowing, clear wood base coat "pu
water
base or pu acrylic 2k" of a reputed standard company before using the veneer.
Moisture Absorption or humidity
Cause:
High humidity or dust can ruin the finish. If the veneer absorbs
moisture from the air, the dye can bleed or migrate.
Effect:
Uneven or blurred colour zones.
Advice:
Work in a clean, dry, well-ventilated dry space.
Use of Incompatible Polish or Sealer /
Incorrect or Harsh Solvents
Cause:
Some polishes or thinners (especially strong ones like acetone or high-concentration
nc
thinners) can react with the pigments / dyes used specially in dyed and engineered
hybrid veneer.
Effect:
These can react with the pigments/dyes.
Result:
Fading, Colour lifting, yellowing or chemical blotching.
Advice:
Always test the finish on a sample piece before applying it on the full
surface.
use compatible sealers and polishes specifically formulated for dyed & engineered
hibrid
veneer.
Chemical Contamination
Cause:
Use of contaminated brushes, cloths or spray guns.
Effect:
Cross-reactions with cleaning agents, oils or other residues.
Advice:
Spotting or colour distortion in the final polish.
Terms & Conditions Regarding Delivery and Returns
(ONLY IF THERE IS ANY MANUFACTURING DEFECT)
-
Goods once sold are not returnable under any condition, except in cases of genuine manufacturing defects that are reported within the specified time frame.
-
No claims will be accepted after the complaint period has lapsed, under any circumstances.
-
If no complaint is registered within the specified time period, it will be considered that the goods have been received in good and acceptable condition. accordingly, you will be required to settle the invoice within the agreed payment terms.
Goods Return Timeline
(ONLY IF THERE IS ANY MANUFACTURING DEFECT)
30 Days
From the date of billing
Natural Veneer
10 Days
From the date of billing
Dyed and
Hybrid Veneer
10 Days
From the date of billing
Barcode - Furrow -
Chroma - Chroma Composite -
Chroma Ribbed - Mattle - Bunito -
Marvel - Metalico
Kindly Note:
-
Don’t use nail on prefinished product. use nail free glue instead.
-
Don’t sand the surface of prefinished product.
-
No guarantee / no warranty for dyed and hybrid veneer color.
-
No guarantee / no warranty for any product pressed on flexible fleece paper.
