Wood Veneer Edgebanding
The unsurpassed quality of Turakhia's genuine
wood veneers is also to be found in the company's premium-grade
veneer edgebanding tapes. Available in the same wide array of wood
species as its flexible veneer sheets, Turakhia's wood edgebanding
is finger jointed and masterfully matched to assure perfect consistency
of color and grain.
Our Edgebanding department has a definite
advantage over the competition because we purchase only those
veneers that closely adhere to our formal specifications
directly from the vast inventory of our departmentally linked
Veneer Face plant. The acceptable veneer is butt matched and
color / grain matched at points of transition from one flitch to
another. We produce a nearly invisible staggered finger joint that
is closely inspected over lights to ensure that only good tight
joints are allowed into our finished products. We use only the
highest quality, fully PVA impregnated fleece to reinforce our
veneers and very closely monitor our lamination process for
consistent bond quality. All edgebanding is re-inspected several
times before it is sent for shipment. Our fleece backed and sanded
quality wood Veneer Edgebanding comes in 660' rolls and our
PVA hot melt pre-coated rolls are 330' long. The Minimum order
size for the pre-coated veneers is two rolls and for the normal
fleece backed it's one roll. Prices may vary with order size.
- Available in widths
ranging from 5/8" to 8"
- Thin veneer coils are
stocked and immediately available in the most popular
wood species
- Veneers are perfectly
endmatched and bookmatched
- Canplast utilizes the
best staggered fingerjointing technology to provide
stronger, less visible joints
- No off-cuts or scraps
used in the production process
- Veneer pre-sanded and
ruggedly reinforced with solid, single-fleece backer
(double fleecing available for extra wrapping strength)
- Fleece backer will not
splinter, delaminate or fuzz when trimmed
- Available either pre-glued
or without adhesive
- Coils result in increased
machine throughput and efficiency with minimal waste
- Quality thick edges
made using multilayer process and high performance
adhesives
- Precisely calibrated
for consistent thickness throughout
- Available in widths
ranging from 13 mm (1/2") up to master coils
of 290 mm (11.5")
- Available in thicknesses
from 1 mm (.040") to 2.8 mm (.110")
- Stocked and immediately
available in the most popular wood species
Coated edgebanding tapes are available in
sizes of 1/2 " to 12" wide x 250' long, while uncoated
tapes are available 1/2" to 12" wide x 500' long. They may
also be obtained raw (no backing) or fleece backed, precoated
with hot melt or pressure sensitive adhesive.
